The powerful brake robot CB2100 is characterized by a rugged construction and the versatility of possible applications in everyday test operations. In addition to the control variables pedal position and pedal force, the vehicle brake pressure and vehicle deceleration can also be controlled. Switching between the four control modes is of course possible also within a test run. Numerous interfaces facilitate the integration of sensors. As for all VEHICO robots we attached great importance to a short setup time and an intuitional operation. With our brake robot we offer the prerequisites for objective brake testing.

 

BrakeRobotCB2100 2Controller passengers sideWebinterface Welcome
 

 

The VEHICO Brake Robot offers the following features


  • strong and fast
    The VEHICO Brake Robot CB2100 can provide a force of up to 2000N on the brake pedal. Besides the high forces, a velocity of up to 120cm/s can be achieved. The high velocity capabilities are particularly important to trigger HBA (hydraulic brake assist) systems, because these systems are activated only by the exceeding of a pressure gradient.

  • versatile
    The robot comes with four control modes: pedal position, pedal force, brake pressure and vehicle deceleration. Switching between the four control modes is of course possible also within a test run.

  • safe
    The brake pedal can be overridden manually at any time. The driver always has the opportunity to intervene and bring the vehicle to a safe stop in case of imminent danger.

  • intuitive
    For many years VEHICO successfully uses an intuitive scripting language with which all possible profiles can be freely programmed by simple commands and associated parameters.
  • adaptive
    The brake robot can be installed with little time spent in almost every standard car.

  • unique
    With its impressive performance and its outstanding cost/performance ratio the brake robot CB2100 is virtually unrivaled on the driving robot market.

  • OBD2 Interface
    Likewise all robots the VEHICO brake robot is equipped with an OBD2 interface. With this you are conveniently enabled to use the cars own velocity signal as trigger signal for brake tests and can abandon an external sensor.

  • combinable with all VEHICO steering and gas pedal robots
    The brake robot is combinable with all VEHICO steering and gas pedal robots. All driving robots can be operated together from one common webinterface, they can run synchronized between each other and the logged data is merged.

 

Other features


  • connect any sensors on freely configurable CAN interface with dbc file import
  • different CAN signals may be computed with each other, e.g. to calculate a TTC (time to collision) value out of distance and speed
  • decoupling from the automotive electrical system possible
  • system controller has its own UPS
  • robust, passively cooled microcontroller technology
  • no software installation required
  • for vehicles with manual and automatic transmission
  • driver seat is largely unaffected by the installation of the robot

 

Technical Data


max. velocity 120 cm/s
max. force
2000 N
interfaces CAN, LAN, RS232, Digital In, Digital Out
power supply vehicle on-board power 11-15V DC
weight of drive unit 8 kg
resolution pedal position
0.01 mm

 

Range of Application


  • HBA tests with high pressure gradients
  • ABS tests with pulsating brake pedal
  • EuroNCAP AEB city, inter urban and pedestrian testing
  • automated braking maneuvers
  • defined deceleration of pulled crash targets for testing of active brake assist systems
  • use in vehicles with active braking assistant for soft crash target tests combined with TTC (time to collision) trigger
  • brake pressure analysis
  • ... and much more

 

More information


For further information about the brake robot contact us via email This email address is being protected from spambots. You need JavaScript enabled to view it. , by phone +49-531-20835-110 or contact one of our international sales partner!

Headlines

Flexibility is the most important to driving robots! VEHICO makes equipping of test vehicles easy. Thanks to the design philosophy of VEHICO robots vehicles can be equipped in the shortest possible time.

What customer say about us

"Their support is excellent. They don't drop you."

VEHICO GmbH

Buechnerstrasse 6
38118 Braunschweig
GERMANY

Phone: +49 531 20835 110
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Scroll to top